Aussie II Cabinet

FEATURES

• When open, the Aussie II boasts 31 ½ square feet of sewing space
• Quilt leaf stored on the back of the cabinet 
  • Expands your workspace and prevents large quilts or large pieces of fabric from pulling and ending up on the floor
• Adjustable three-position hydraulic lift:
  • Moves your machine into three positions: free-arm, flatbed and storage
  • Designed with gas strut mechanism with a 55-pound sewing machine capacity
• A convenient rolling caddy for extra storage that can be tucked away when not in use 
  • A serger fits neatly in the caddy 
  • Includes two drawers to store your notions and more!
  • Caddy can fit in any of three positions:  
    • 1. Pull out near your sewing position
    • 2. Attached to door for larger work area
    • 3. Freestanding
• Three door bins, one large and two small for additional storage
• When your sewing is complete, safely conceal and secure all your sewing notions and equipment by closing both doors and turning the key to lock them shut
• Locking casters provide excellent portability and stability
• Optional Custom Machine Insert for a flush surface (sold separately)
• Additional information can be found on our Aussie II Cabinet informational sheet
• Kangaroo Sewing Furniture Lifetime Limited Warranty
• Available Finishes: Teak or Ash White

CABINET SPECIFICATIONS

• Open Cabinet Dimensions: 
  • Quilt leaf open & rolling caddy extended in front: 
    • 100 ½” W x 80 ¼” D x 29 ½” H
  • Quilt leaf folded down and the rolling caddy is tucked away: 
    • 100 ½” W x 22 ¼” D x 29 ½” H
  • Closed Dimensions: 
    • 49 ¾” W x 22 ¼” D x 30 ¼” H
• Caddy Dimensions: 
  • 13 ?” W x 16″ D x 13 ½ ” H
  • Drawer Dimensions (two drawers) 
    • 11″ W x 11 ?” D x 2 ¾” H
• Door Bin Dimensions: 
  • Large: 17″ W x 5 ¼” D x 5 ¼” H
  • Small: 17” W x 3 ?” D x 3 ?” H
• Aussie II is ideal for Sewing Machines: 
  • Up to 55 pounds
  • Maximum Machine dimensions: 
    • Width: 23 ¾”  (left to right)
    • Depth: 12 ½” (front to back)
    • Height: 14 ½” 
  • Please measure your machine and include knobs, plugs, etc. that extend beyond the body of the machine
• The entire Aussie II features tough melamine laminate, MDF, and composite wood

SEWING MACHINES THAT DO NOT FIT INTO THE AUSSIE II

We are aware of the following sewing machines that are too large to fit into the Aussie II sewing cabinet:

• BabyLock – Destiny and Solaris
• Brother – Dream VX8500D and Luminaire Innov-is XP1
• Janome – Horizon Memory Craft 15000
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.
• Elna – eXpressive 920
  • The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how the machine sits on the platform in flatbed position.

Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

Revised 03/25/2019

SHIPPING INFORMATION

• The cabinet is shipped ready to assemble in 5 separate boxes
• Aussie II weighs a total of 235 pounds
• Arrow determines shipping carrier, FedEx or UPS
• Cabinets, tables, and chairs cannot be shipped to a PO Box
• If ordered, a custom insert will be shipped separately and delivered three-four weeks later
• Aussie is available fully assembled at Arrow Dealers