Skip Navigation Website Accessibility
 

HTV Soft Metallic Earthtone Camo Vinyl 1 yd

Vinyl Color:
Vinyl Type:
Vinyl Pattern:
    per yard
Quantity:       yard(s)

Add To Design Wall

Add to Cart


Application Instructions

Blade – 45°
Cut – Mirror image
Temp – 302°-320° F
Pressure – Firm, even
Time – 7-8 seconds
Peel – Cold, then cover with Teflon and repress for 3-5 seconds
Care – Wash inside out, cold water, gentle cycle. Tumble dry low.
Applies to: Cotton, Uncoated Polyester, Fabric Blends, Polyester/Acrylic, and Similar Fabrics (Not suitable for treated or dyed garments) Excluding Nylon

After washing, always iron inside out. Do not iron directly on the film. We do NOT recommend layering with this material. Please note: repressing keeps material looking consistent throughout wash cycles, but will give it more of a brushed metal appearance. 

Splices in rolls may cause material to conform around edges of tape, but will not affect the cutting or the finished look. 

Please note: the White is translucent. The following colors are translucent in some areas and the garment color will show through: Green/Black Camo, Earthtone Camo, Grey Camo, Blue/Black Camo. The following colors are slightly translucent, but does not allow color to show through when pressed: Rainbow Oil, Leopard Silver, and Leopard Gold. 

Please note: the Holoshine colors have a horizontal line going down the middle of the roll and a vertical line approx. every 29.5″. Is is part of the manufacturing process and is not a defect.